Selection of Evaporation Process for Wastewater Evaporator


Release time:

2024-04-30

The wastewater evaporator is based on the principle of evaporation concentration crystallization for the characteristics of high salt content and high concentration of chemical organic wastewater. Multi-effect decompression evaporation is used to concentrate and crystallize organic wastewater. After the salt in the concentrated solution is separated, it is recovered by a salt collector. The concentrated solution is dried and recycled or incinerated. The evaporated condensed water is generally treated by subsequent biochemical treatment, which can realize the standard of wastewater discharge.

The wastewater evaporator is based on the principle of evaporation concentration crystallization for the characteristics of high salt content and high concentration of chemical organic wastewater. Multi-effect decompression evaporation is used to concentrate and crystallize organic wastewater. After the salt in the concentrated solution is separated, it is recovered by a salt collector. The concentrated solution is dried and recycled or incinerated. The evaporated condensed water is generally treated by subsequent biochemical treatment, which can realize the standard of wastewater discharge.
Wastewater evaporator in the production process will directly concentrate the liquid, such as its high concentration of waste liquid incineration treatment and electroplating solution concentration and other steps, the cutting oil of the mechanical processing industry needs to be further promoted concentrated dilute solution directly to produce products or the concentrated solution reprocessing.
In the process of using the wastewater evaporator, the evaporation process will be selected directly according to the characteristics of its feed liquid. In general, the multi-effect evaporation and drying process will be adopted, and the wastewater and sewage will be treated by the equipment crystallization process. After the evaporation treatment, the water quality can reach its national emission standard.
The wastewater evaporator needs to configure a complete set of treatment solutions according to its experience during treatment, so as to ensure that the whole system has a relatively good treatment effect, and then according to the characteristics of its sewage and wastewater, it is targeted to take the manufacture of its anti-corrosion materials.

Tag:

Related News

undefined

undefined

Copyright©2024 Jingshan Haojie Intelligent Environmental Protection Machinery Technology Development Co., Ltd.